BASSFACE

BASSFACE TeamZXM10/4 - 10" SPL Midrange/Midbass Speaker

  • Sale
  • Regular price £164.99
Tax included.


TeamZXM10/4 10" 1x4Ohm SVC 500WRMS Ultimate High SPL Midrange/Midbass For Custom Installations

KEY FACTS


Product Category Midbass & Midrange Speakers
Version 1
Series Team
Date Added 15/02/2021
Date Modified 03/09/2021
Barcode 680044778662
Production Status Current
Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) 5000
Product Height (mm) 110
Product Length (mm) 260
Product Width (mm) 260
Complete Product Pack Weight (g) 6000
Retail Carton L (mm) 280
Retail Carton W (mm) 280
Retail Carton H (mm) 130
Operating Temperature (Degrees Celsius) 0-50
Warranty (Months) 12
Sold As Single

SPEAKER DATA


Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) 500
Overall Diameter (mm) 295
Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 140
Installation Cut-out Diameter (mm) 229
Overall Depth (mm) 110
Mounting Depth (mm) 97
Front Protrusion From Mounting Plane (mm) 14
System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) 100-3,500
Impedance (Ohm) (Nominal) 4
Sensitivity (db/1Wm) 99.08
Total Magnet Weight (Oz) 20
Magnet Size (mm) 35*10*8pcs
Magnet Type N40
Magnet Qty 8
Top Plate thickness (mm) 11
Back Plate thickness (mm) 13.5
Recommended Cable 12AWG/OFC
Voice Coil Former Spec TIL
Voice Coil Type CCA Round Wire
Voice Coil Diameter (mm) 67.5
Voice Coil Internal Diameter (mm) 65.5
Voice Coil External Diameter (mm) 67.5
Voice Coil Winding Hight (mm) 13.8
Voice Coil Winding (Layers) 2
Cone Type Coated Non Pressed Paper
Spider Compliance soft
Spider Type Linear
Spider Diameter (mm) 143
Spider Design Single
Surround Dual Roll
Surround Material Cloth
Tinsel Wire Dual
Terminal Push

Team ZXM concept was designed to offer an all-round Ultra high performance combine midrange/midbass device at a reasonable price point. The new engineering team drew up a wish list of specification points and made several prototypes before settling on the current basket, motor and cone layouts. From there detail changes were made to almost every aspect of the basic design focussing on each detail. Performance was optimised to allow the driver to run well in almost any application. The Team ZXM branding was originally conceived in mid-2019, with outline specifications in place by the end of that year. Prototypes were built throughout 2020 and first production models were made available Q3 2021