Rockford Fosgate 10" Enclosure Punch 500 Mono Bass Package (P1-1X10 & R500X1D)

  • Sale
  • Regular price £379.99
Tax included.


  • Package includes:
  • Rockford Fosgate Punch P1-1X10 - Single R1 12” 500 Watt Loaded Enclosure
  • Rockford Fosgate Prime R500X1D - 500 Watt Mono Amplifier
  • 8 Gauge Wiring Kit

ROCKFORD FOSGATE P1-1X10

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2 & P3 models, but are easier to move in-n-out of vehicles due to their lighter weight.

  • Constructed with 5/8" MDF
  • Proprietary high-flow, low-noise port
  • High current binding posts


Specifications:

  • Woofer Size: 10"
  • Woofer Series: Punch P1 (P1S4-10)
  • Nominal Impedance (ea): 4-Ohm
  • Internally wired to create a 4-Ohm amplifier load
  • Power Handling: 250 Watts RMS / 500 Watts Max
  • System Configuration: Vented
  • Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
  • Speaker Connector: Up to 10 AWG compression terminals
  • Shipping Weight: 36 Lbs. (16.32 kg)
  • Dimensions: 13.125" x 17" x 15.125" (33.3cm x 43.2cm x 38.4cm)

ROCKFORD FOSGATE PRIME R500X1D

Are you ready for a dedicated subwoofer amplifier? The Prime R500X1D is the perfect companion for any Car Audio Fanatic getting into mobile audio who wants a two-amplifier system: one amp running mids/highs and the second running subwoofers. This amplifier features variable Punch Bass, variable crossovers, Pass-Thru jacks to daisy chain another amplifier, and a remote Punch Level Control for mounting under the dash or the center console. 

  • 12dB/octave Butterworth crossover
  • RCA pass-thru outputs
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • High level inputs
  • Remote PLC (Punch Level Control)
  • 0°/180° Phase Switch
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on


Specification:

  • Number of Channels: 1
  • Rated Power(RMS Continuous Power): 300 Watts x 1 @ 4-Ohm
  • Rated Power(RMS Continuous Power): 500 Watts x 1 @ 2-Ohm
  • Total Power(Sum of Rated Power): 500 Watts RMS
  • Dynamic Power (PVC/PowerCube® Measurement): 333 Watts x 4 @ 4-Ohms 0° Res
  • Dynamic Power (PVC/PowerCube® Measurement): 647 Watts x 4 @ 2-Ohms 0° Res
  • Frequency Response: 20Hz to 250Hz +/-1dB
  • Efficiency (average): 89% @ 4-Ohm
  • Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% / 2-Ohm: <1.0%
  • Crossover Controls: Low Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
  • Tone Controls:     Punch Bass: 0dB to +18dB @ 45Hz / Phase Control: Variable 0° to 180°
  • Input Sensitivity: 150 mV to 4 V
  • Signal Input: Low Level: 1 RCA pair
  • Signal Output: Low Level: 1 RCA pair
  • Power Input Connector:     Screw Terminal
  • Power Wire Gauge: 4 AWG
  • Speaker Output Connector: Screw Terminal
  • Speaker Wire Gauge: 8 AWG
  • Heat Sink Type: Extruded Aluminium
  • Cooling: Convection
  • Remote Controls: Punch Level Control: When connected is linked to "gain control" to provide remote output level
  • Visual Indicators: Power/Protect LED
  • Circuit Topology Class: Class-D
  • Operating Voltage: 9 - 16 VDC
  • Recommended Fuse(not included): 50 A
  • Max. Current Draw (13.8V Sinewave): 50 A
  • Average Current Draw (13.8V Music): 25 A
  • Suggested Alternator: 75 A
  • Shipping Weight: 5.1 Lbs. (2.31 Kg.)
  • Dimensions (HxWxL): 1.98 x 6.77 x 8.5 (in) / 5.02 x 17.19 x 21.59 (cm)

CONNECTS 2 PRO 8AWG

The Connects2 PRO Series 8 AWG 720 Watt Amp Wiring Kit provides an installation kit with 8 gauge flexible power and ground cable. It is perfect for providing superior current flow and high quality speaker and RCA signal cable for professional sound and performance. 

PRO Series wiring kits give you everything you need to install a car power amplifier or amplified bass box.

  • 8AWG CCA Power Cable - 5.2m Red frosted cable with mounted ring terminal, 6.7mm.
  • 8AWG CCA Ground Cable - 0.8m Black frosted cable with mounted ring terminal, 6.7mm.
  • Speaker Cable - 5m Blue/White frosted cable, 1.5mm.
  • RCA Cable - 5m Black cable with remote wire.
  • Gold plated RCA plugs, one end straight, one end angled.
  • Fuse Holder - Waterproof Nickel plated Mini-ANL Fuse holder with 60A Mini-ANL Fuse.
  • Terminals - 2pcs fork terminals
  • For the installation of aftermarket amplifiers & active boxes
  • Complete kit with all components required