MOSCONI GLADEN PRO EVO 1|10 - Mono High-Performance Amplifier


Price:
£789

Description

  • 1-channel amplifier
  • Class D technology
  • 900 watts @ 4 ohms, 1600 watts @ 2 ohms
  • Up to 3000 watts @ 1 ohm

Overview Mosconi Pro 1|10 EVO

Ultimate performance. Maximum control.

The MOSCONI PRO 1|10 EVO is a powerful mono power amplifier designed for high-performance car audio systems.
With up to 3,000 watts RMS at 1 ohm, it provides ample power while maintaining precise control over the speakers.

Thanks to its combination of efficient Class-D technology and optimized signal architecture, the PRO 1|10 EVO is ideal for subwoofer and high-power midwoofer applications.

High power density in a compact design.

The Class-D amplifier delivers high output power while requiring minimal space and generating low heat.
This makes the PRO 1|10 EVO ideal for installations with limited space.
Precise signal adjustment is possible without potentiometers.

Separate signal and power paths allow control down to the finest detail.

The PRO 1|10 AAB EVO's internal architecture strictly separates the audio signal path from the power supply.

While the power supply handles high currents and dynamic load changes, the audio signal path remains completely isolated from these influences.
This separation is implemented not only conceptually, but also at the layout level through clearly defined signal routing and separate ground domains.

The result is a significantly reduced impact from:

- power supply current peaks
- load-induced feedback into the supply rails
- electromagnetic interference within the amplifier

Even under high output levels and complex load conditions, the signal remains stable and unaltered.

Precise signal adjustment without potentiometers.

Input sensitivity can be adjusted separately for each channel via DIP switches.
This allows for consistent and long-lasting settings without the need for mechanical wear parts.

Adjustments are made in 0.25-volt increments within the range of 1 to 8,75 volts.

Optimized DirectDSP input

The integrated DirectDSP input allows for direct connection to external DSP systems.

Since signal processing in the amplifier is eliminated, the audio signal remains unchanged and low-loss.
This is particularly relevant for fully DSP-based systems.

Stable power output under real-world conditions

A microprocessor-controlled power supply ensures stable output power under real-world conditions, even with voltage fluctuations in the vehicle.

An internal system monitors temperature and operating status, actively controlling cooling.

Technical highlights:

  • Class-D mono power amplifier
  • Up to 3,000 watts RMS @ 1 ohm
  • High damping factor (>1,000) for precise speaker control
  • Efficiency-optimized design with low heat generation
  • DIP switch configuration for exact signal tuning
  • DirectDSP input for unaltered signal routing
  • Microprocessor monitoring with temperature-controlled fan
  • 4-layer PCB with 70 µm copper for minimal losses

Technical Specifications: Mosconi Pro 1|10-EVO

POWER OUTPUT:

  • Output power at 4 ohms:

    1 × 900 watts RMS

  • Output power at 2 ohms:

    1 × 1600 watts RMS

  • Output power at 1 ohm:

    1 × 3000 watts RMS (music signals and real loudspeakers only)

  • Rated power (CEA-2006-A):

    1 × 900 watts at 14.4 V, 4 ohms, < 1% THD+N

AMPLIFIER:

  • Amplifier class:

    Class D

  • THD at 4 ohms:

    < 0.05% (1 kHz, 100 W RMS)

  • Frequency response (−3 dB, 1 W):

    13 Hz – 29 kHz

  • Signal-to-noise ratio:

    108 dB(A), referenced to 600 W RMS

  • S/N ratio (CEA-2006-A):

    > 80 dB(A), referenced to 1 W at 4 ohms

  • Damping factor at 4 ohms:

    > 100

  • Equivalent input noise (10 Hz–22 kHz, A-weighted):

    < 8 µV

INPUTS & OUTPUTS:

  • Inputs:

    2 × RCA, gold-plated

  • Input sensitivity:

    1–8.75 V

  • Sensitivity adjustment:

    32 settings via DIP switch

  • Input impedance:

    20 kΩ

  • Speaker output:

    Gold-plated terminal block

POWER SUPPLY & PROTECTION

  • Power supply topology:

    Unregulated push-pull DC/DC converter, 50 kHz

  • Operating voltage:

    10–16 V

  • Fuse:

    1 × 150 A

  • Overall efficiency:

    > 75%

  • Idle current at 14.4 V:

    1.0 A

  • Standby current:

    < 2 mA

  • Mute delay:

    3 seconds

  • Start-stop compatibility:

    Down to 7.5 V for up to 300 ms

  • Fan control:

    On at 50 °C / off at 45 °C

  • Thermal shutdown / restart:

    90 °C / 70 °C

DIMENSIONS & FINISH

  • Dimensions (W × D × H):

    235 × 205 × 55 mm

  • Weight:

    2.5 kg

  • Finish:

    Black / Titanium

  • PCB:

    4-layer FR4, 70 µm copper, gold finish

Payment & Security

Apple Pay Bancontact Diners Club Discover Google Pay Mastercard MB WAY PayPal Satispay Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed