- Package includes:
- Rockford Fosgate Prime R1-1X10 - Single R1 10” 200 Watt Loaded Enclosure
- Rockford Fosgate Prime R250X1 - 250 Watt Mono Amplifier
- 8 Gauge Wiring Kit
ROCKFORD FOSGATE R1-1X10
The Prime R1-1X10 is a single 10” sealed enclosure that provides great low bass response at an incredible value. The enclosure is constructed with durable MDF (Medium Density Fibreboard) and covered in resilient high-density carpet. The subwoofer features a Rockford Fosgate’s signature Anodized aluminium voice coil former to deliver superior power handling over the competition.
The R1-1X10 is a loaded enclosure containing a single 10” subwoofer constructed with durable MDF, high-density carpet, and features quick release terminals to promptly remove or replace the enclosure in your ride.
- Constructed with 5/8" MDF
- Covered with high density carpet
- High current binding posts
- Woofer Size:10"
- Woofer Series:Prime (R1S4-10)
- Nominal Impedance (ea): 4-Ohm Internally wired to create a 4-Ohm amplifier load
- Power Handling: 200 Watts RMS / 400 Watts Max
- System Configuration: Sealed
- Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
- Speaker Connector: Up to 12 AWG compression terminals
- Dimensions:12.2" x W 15.94" x D 12.11"
- 31cm x 40.5cm x 30.8cm
ROCKFORD FOSGATE PRIME R250X1
The PRIME R250X1 amplifier is great mono amplifier in a compact chassis and respectable power output in any sound system. The R250X1 mono output design also makes it great for running a pair of 8" or 10" 4-ohm SVC subwoofers wired in parallel. The included Remote Punch Level Control corrects for any acoustic anomalies in the automobile environment, making certain that bass notes sound deep and rich.
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- RCA pass-thru outputs
- High level inputs
- Remote PLC (Punch Level Control)
- 0°/180° Phase Switch
- Real time output and power supply thermal sensing
- Cast aluminium heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
- Number of Channels: 1
- Rated Power(RMS Continuous Power): 150 Watts x 1 @ 4-Ohm
- Rated Power(RMS Continuous Power): 250 Watts x 1 @ 2-Ohm
- Total Power(Sum of Rated Power): 250 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement): 186 Watts x 4 @ 4-Ohms 0° Res
- Dynamic Power (PVC/PowerCube® Measurement): 298 Watts x 4 @ 2-Ohms 0° Res
- Frequency Response: 20Hz to 250Hz +/-1dB
- Efficiency (average): 70% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% / 2-Ohm: <1.0% / 1-Ohm: <1.0%
- Crossover Controls: Low Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
- Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
- Input Sensitivity: 150 mV to 4 V
- Signal Input: Low Level: 1 RCA pair
- Signal Output: Low Level: 1 RCA pair
- Power Input Connector: Screw terminal
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw terminal
- Speaker Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminium
- Cooling: Convection
- Remote Controls: Punch Level Control
- (when connected, is linked to "gain control" to provide remote output level)
- Visual Indicators: Power/Protect LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse(not included): 30 A
- Max. Current Draw (13.8V Sinewave): 30 A
- Average Current Draw (13.8V Music): 15 A
- Suggested Alternator: 75 A
- Shipping Weight: 7.1 Lbs. (3.22 Kg.)
- Dimensions (HxWxL): 1.98 x 6.77 x 11.22 (in) / 5 x 17.2 x 28.5 (cm)
CONNECTS 2 PRO SERIES 8AWG
The Connects2 PRO Series 8 AWG 720 Watt Amp Wiring Kit provides an installation kit with 8 gauge flexible power and ground cable. It is perfect for providing superior current flow and high quality speaker and RCA signal cable for professional sound and performance.
PRO Series wiring kits give you everything you need to install a car power amplifier or amplified bass box.
- 8AWG CCA Power Cable - 5.2m Red frosted cable with mounted ring terminal, 6.7mm.
- 8AWG CCA Ground Cable - 0.8m Black frosted cable with mounted ring terminal, 6.7mm.
- Speaker Cable - 5m Blue/White frosted cable, 1.5mm.
- RCA Cable - 5m Black cable with remote wire.
- Gold plated RCA plugs, one end straight, one end angled.
- Fuse Holder - Waterproof Nickel plated Mini-ANL Fuse holder with 60A Mini-ANL Fuse.
- Terminals - 2pcs fork terminals
- For the installation of aftermarket amplifiers & active boxes
- Complete kit with all components required